Fully automatic turntable wrapping machine - EASY ROUND



EASY ROUND is a fully automatic turntable wrapping machine for stretch wrapping palletised loads.

The pallet is wrapped as the turntable rotates, thanks to a system with a toothed thrust bearing and a gear motor controlled by an inverter.

EASY ROUND is a plug-and-play machine which is easy to install and suitable for customers with a limited footprint. It can be configured in-line or with a 90° rotation at the end of the line. Available with rollers or chains.

Standard features:

  • Motorised pre-stretch carriage (model MS-Pro) controlled by an inverter, with pre-stretch with fixed interchangeable ratios. The speed with which the film unwinds is controlled by a sensor which constantly adjusts the motor speed to ensure the pressure exerted on the film is the same over the whole perimeter of the load. The force exerted by the film on the product is electronically controlled and adjusted from the electrical control panel.
  • Cutting and welding unit which cuts and welds the stretch film after wrapping. This prevents loose film tails which could cause load stability problems during transportation. This clamping system can be used with any kind of load; the welding unit never comes into contact with the product as it operates against a contrast bar that is then folded away.


Also available the model  EASY ROUND TS, fully automatic rotating arm wrapping machine with integrated top sheet applicator. The TS integrated device covers the top of the palletised load with a polyethylene film and is ideal for protecting it against water and dust.

Dati tecnici

Technical data

Standard cycle Up to 35 p/h Up to 35 p/h
Waterproof cycle Up to 25 p/h
Rotation speed Up to 11 rpm Up to 11 rpm
Pallet dimensions*
Min. LxW 800x600 mm 800x600 mm
Max. LxW 1000x1200 mm 800x1200 mm
Min. load height 500 mm 500 mm
Max. load height 2100 mm 2100 mm
*Available for non-standard pallet and load dimensions.



Componenti opzionali

Optional components

  • Top press plate

    The top press plate exerts pressure on the palletised load to keep it stable during wrapping.
    Specially designed for wrapping machine loads, it is available in a pneumatic or electromechanical pantograph version.

  • Roping device

    As the name suggests, the roping system on the carriage reduces the width of the film until a rope is created, increasing load stability and securing the product to the pallet.

  • In-line top sheet applicator STF203

    This automatic device, positioned before the wrapping machine, covers the top of the palletised load with a polyethylene film, protecting it from dust. The film is cold cut by a pneumatically powered blade. The amount of film to place on the load is automatically calculated by a photocell, ensuring optimal consumption.

  • Electronic pre-stretch carriage with two motors – mod. PEM-Duo

    Electronic spool carriage with variable pre-stretching driven by two motors controlled by an inverter.

    The pre-stretch percentage can be set from the electrical control panel (minimum 120% – maximum 450%) by adjusting the speeds of the motors installed on the carriage separately. This takes full advantage of the characteristics of the film, with a significant reduction in the amount used.

    It is also possible to set different pre-stretch percentages for each programme and wrapping cycle, ensuring maximum stability of the palletised load.

  • Clamping and tucking unit

    The ecoMATRIX clamping unit tucks the film tail into the last wrap through a sequence of electropneumatic movements. This sealing system can be used with any kind of film (micro perforated, macro-perforated and standard) and is particularly recommended in lines where there are automatic warehouses, LGVs and/or AGVs.

    This device, which does not cut or weld, emits no toxic fumes and is not affected by variations in ambient temperature.

Ricevi subito via email la brochure di EASY ROUND | EASY ROUND TS

Compila il form sottostante per ricevere la brochure via email.

Request the EASY ROUND | EASY ROUND TS brochure, now

Fill the underlying form to receive it.

Qualche dubbio? Siamo pronti a risponderti.

Chiamaci al +39 0547 312811

Any doubt? We’re here to help.

Call us at +39 0547 312811